Xa Email
Facebook
Twitter
Linkedin
Youtube
UF Membrane Module 8 nti PVC Ultrafiltration Membrane Module UFc200AM Kev Kho Dej Haus
Product Overview
UFc200AM capillary hollow fiber membrane yog cov khoom siv polymer siab, uas yuav tsis muaj qhov hloov pauv. Hloov kho cov khoom siv PVC, uas tau txais los ntawm cov khoom no, muaj qhov zoo permeable, zoo txhua yam khoom, zoo tshuaj tiv thaiv thiab muaj kuab paug. MWCO yog 100K Dalton, daim nyias nyias ID / OD yog 1.0mm / 1.8mm, lim hom yog sab hauv-tawm.
Daim ntawv thov
- Kev tsim cov dej ntxhia, dej roob roob thiab lwm yam kua uas tsis muaj menyuam.
- Kev kho mob ntawm cov kais dej, dej ntws, dej zoo, dej ntws, thiab lwm yam.
- Pretreatment ntawm RO.
- Kev kho, rov siv dua thiab rov siv dua cov dej khib nyiab hauv kev lag luam.
Filtration Performance
Cov khoom no tau raug pov thawj tias muaj cov teebmeem hauv qab lim dej raws li kev pabcuam ntawm cov dej sib txawv:
| Cov khoom xyaw | nyhuv |
| SS, Particles> 1μm | Kev tshem tawm tus nqi ≥ 99% |
| SDI | ≤ 3 |
| Kab mob, kab mob | > 4 log |
| Tawg | |
| TOC | Kev tshem tawm tus nqi: 0-25% |
* Cov ntaub ntawv saum toj no tau txais nyob rau hauv cov xwm txheej uas pub dej turbidity yog
Khoom Parameters
Technical Parameters:
| Hom lim | sab hauv-tawm |
| Membrane Khoom | Hloov kho PVC |
| MWCO | 100 K Dalton |
| Membrane cheeb tsam | 27m ua2 |
| Diaphragms ID/OD | 1.0mm / 1.8 hli |
| Qhov ntev | Φ200mm * 1480mm |
| Connector Loj | DN40 Union |
Cov ntaub ntawv thov:
| Ntshiab Dej Flux | 7,000L / H (0.15MPa, 25 ℃) |
| Tsim Flux | 35-100L / m2.hr (0.15MPa, 25 ℃) |
| Pom zoo ua haujlwm siab | ≤ 0.2 MPa |
| Qhov siab tshaj plaws Transmembrane siab | 0.2 MPa siab |
| Ua haujlwm kub siab tshaj plaws | 45 ℃ |
| PH Range | Ua haujlwm: 4-10; Ntxuav: 2-12 |
| Kev ua haujlwm hom | Cross-flow los yog Dead-end |
Kev xav tau dej pub mis:
Ua ntej pub dej, lub lim kev ruaj ntseg
| Tawg | ≤ 15 NTU |
| Roj & Roj | ≤ 2mg / L |
| SS | ≤ 20mg / L |
| Tag Nrho Cov Hlau | ≤ 1mg / L |
| Nruam Residual Chlorine | ≤ 5ppm |
| COD | Pom zoo ≤ 500mg / L |
* Cov ntaub ntawv ntawm UF membrane yog polymer organic yas, yuav tsum tsis txhob muaj cov kuab tshuaj organic hauv dej nyoos.
Kev khiav hauj lwm Parameter:
| Siab kawg Backwashing Pressure | 0.2 MPa siab |
| Backwashing Flow Rate | 100-150L / m2.hr |
| Backwashing zaus | Txhua 30-60 feeb. |
| Lub sij hawm rov qab | 30-60s |
| CEB Frequency | 0-4 zaug ib hnub twg |
| CEB Duration | 5-10 feeb. |
| CIP zaus | Txhua 1-3 lub hlis |
| Ntxuav Tshuaj: | |
| Sterilization | 15ppm Sodium Hypochlorite |
| Organic Pollution Ntxuav | 0.2% Sodium Hypochlorite + 0.1% Sodium Hydroxide |
| Inorganic Pollution Ntxuav | 1-2% Citric Acid / 0.2% Hydrochloric Acid |
Khoom siv:
| Cheebtsam | Khoom siv |
| Membrane | Hloov kho PVC |
| Kev sib khi | Epoxy resins |
| Tsev | UPVC |